کد خبر : 11185
تاریخ انتشار : شنبه ۱۲ آبان ۱۳۹۷ - ۱۵:۲۱

اطلاعیه استخدامی شرکت خدمات نفت و گاز Wood Group در امارات/ آبانماه ۹۷

اطلاعیه استخدامی شرکت خدمات نفت و گاز Wood Group در امارات/ آبانماه ۹۷
اطلاعیه استخدامی شرکت خدمات نفت و گاز Wood Group در امارات/ آبانماه 97؛

فرصت های شغلی شرکت خدمات نفت و گاز Wood Group در امارات – ۱ نوامبر ۲۰۱۸
(برای اطلاعات بیشتر روی عنوان شغل کلیک نمائید)

  • Wood is currently looking to recruit for a Senior Planning Engineer to be based in capacity of PMC on newly awarded ADNOC Onshore project. This role will initially be based in client office for a short period of time until it moves to site. – Act as a focal point for engineering discipline leads regarding scheduling and progress issues – Be particularly diligent in recognizing and reporting to Project Management potential problems in all phases of the project – Ensure that the schedules and systems are integrated to measure, trend and forecast the work, and are in place and managed – Contribute to the change management process, analysing and reporting schedule impacts to the project – Updating the proposal schedule to indicate specific milestones agreed upon in the Contract – Preparing engineering and procurement schedules at varying levels of detail – Assisting with obtaining alignment between Engineering and Procurement Schedules – Assisting with obtaining scheduling alignment with key construction activities – Delivering of weekly and monthly project reports – Ensuring that Corporate Systems are set up and maintained inline with project schedules – Periodically updating schedules to include scope changes, latest progress and delivery information – Assisting with development of Design Change Notices by highlighting impact on schedule, and assist with related tracking and re-baselining effort – Obtaining deliverables and drawing lists and updates from disciplines and distribute compiled reports – Developing and distribute project curves of progress, cost and manpower, including planned, actual and forecast figures

    Requisition ID

    ۲۰۱۸-۳۱۶۶۲

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

     

  • Wood is currently looking to recruit a Contracts Specialist to be deployed within a client Project Management Team in PMC capacity to assist in the management of a large EPC project for ADNOC Onshore. – Review EPC Contractors’ proposals for vendors and subcontractor – Review contract management and planning activities of the EPC Work Package with Engineering, Project Controls and Construction – Review and approve EPC Contractors’ RFPs / RFQs in accordance with contract – Ensure that goods and services procured by EPC Contractor meet local regulations and content requirements relative to scope of work, quality and schedule – Organize meetings with EPC Contractor, Company and authorities (as needed) for negotiating and resolving commercial, technical and contract completion issues – Handle effective and timely distribution of reports and pertinent commercial information to and from EPC Contractor in accordance with project instructions – Schedule turnover meetings with Site Personnel, where required – Check timesheets for contract conformance (rates, backup and extensions) – Review EPC Contractors’ invoices and prepare Progress Payment Certificates with Cost Control – Review EPC Contractors’ costs, forecasts and requests for extras – Issue for approval and post Substantial Performance documents – Issue Contract Close – Out documentation such as Contract Close – Out Change Order, Certificate of Final Completion and Waiver of Lien – Participate in contract cost review meetings and regular project progress and assist with preparation of monthly contracts and project progress reports – Carryout Technical Evaluation of Bids, Issue Bid Technical Clarifications, Technical Evaluation Reports and Recommendations

    Requisition ID

    ۲۰۱۸-۳۱۶۶۱

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

     

  • Wood is currently recruiting for a Senior Process Specialist to be based on ADNOC Onshore project in Abu Dhabi, United Arab Emirates.   Successful candidate should be able to perform the following duties: – Provide technical expertise on all engineering subject matter pertaining to process engineering and design – Ensure Process design and engineering compliance with relevant codes, standards and Company standards – Coordinate, Monitor and handle Process design and engineering with EPC contractor as per project expectation and complete the same within the time frame – Work with other discipline engineers within IPMT, EPC contractor, and Adnoc Onshore Engineering / Operation / Site Interface to resolve technical issues and ensure quality process engineering execution and integrity etc – Perform regular and timely technical reviews of Process engineering deliverables developed by engineering consultants / contractors, ensuring design quality in compliance with relevant codes, standards, and best practices – Ensure integration of overall Process engineering coordination within IPMT Engineering Team – Review and approval of Engineering Consultant’s and EPC Contractor’s work and ensure compliance with the project specifications, relevant codes and standards, and best industry practices – Coordinate the required engineering participation in the development and analysis of various design options and business models – Contribute input and expertise in the development and analysis of various design options and business models to design optimization and validation – Participate in teams for equipment sizing / equipment selection considering optimization and standardization – Ensure that the facilities are designed in accordance with the latest corporate guidelines with respect to environment and health aspects – Ensure full utilization of the existing facilities while optimizing the facilities required for the new projects – Participate in layout reviews, Model review, design reviews, and technical workshops – Provide technical assistance and coordination with other discipline engineers – Coordinate technical reviews and bid evaluation, and performance evaluation – Provide technical assistance during installation, pre-commissioning & commissioning

    Requisition ID

    ۲۰۱۸-۳۱۴۱۱

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

     

  • Wood is currently recruiting for a Senior Mechanical Engineer to be based in Abu Dhabi for a permanent contract.   Primary Role: – To Design, Lead and Manage the Major Mechanical Equipments engineering (Such as Rotating, Static & Package equipments) in Pre-Front End Engineering Design (Pre-FEED), Front End Engineering Design (FEED), Engineering, Procurement, and Construction Management (EPCM) & Project Management Consultancy (PMC) jobs. – To have single-point responsibility for all Mechanical equipments deliverables and ensure that they conform to all applicable engineering codes and standards as well as the Client’s policies and procedures – To prepare Major equipment’s Enquiry Specifications, Reviewing and analyzing Vendor bids, Preparation of Technical bid evaluation, Issuing Purchase Specifications, and Reviewing of Vendor documents and co-ordination with various other disciplines for data inputs. – To provide technical assistance, coordination and liaison with other discipline engineers on all aspects of Engineering / technical matters and audits. – To participate in all project safety and DESIGN/HAZOP/HAZID & Constructability reviews as necessary – To participate in Equipment Fabrication workshop activities such as Material inspection, stage inspection, Welding, Painting, NDT inspection & Final inspection. – Active participation in Bid clarification and Vendor kick off meetings, through the course of the projects. – To review and approve Sub-Contractor’s work and ensure compliance with the contract, project specification, relevant codes and standards and best practices. – To provide technical support to maintenance and operation team, carried out trouble shooting and resolving chronic problems, which required more in depth investigation. – To ensure that all work is completed without compromise to quality and is delivered according to the project schedule – To Co-ordinate with Equipment vendors, Inorder to trouble shoots the issues related to Design, Manufacturing, Maintenance, installation. – To liaise with the Client’s Engineering team as required to ensure a consistent approach to project completion – To prepare Engineering Reports on project activities/methods. – To ensure that the overall project is delivered to meet the client needs – To provide direction and guidance on all technical queries relating to equipment engineering – To promote safe behaviour at all times Principal Responsibilities – To provide sound technical advice and solutions to a diversity of technical problems within the discipline – To co-ordinate with other disciplines – To assist in the coordination of all activities related to Major Mechanical Equipments – To identify any areas of concern with respect to progress and/or quality and recommend corrective actions as required

    Requisition ID

    ۲۰۱۸-۳۱۴۰۰

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Staff / Permanent

     

  • Wood is currently looking to recruit a Senior Instrument and Control Engineer to be deployed within a client Project Management Team in PMC capacity to assist in the management of a large EPC project which will be awarded in Q4 2018. – Provide technical expertise on all engineering subject matter pertaining to I&C engineering and design – Ensure I&C design and engineering compliance with relevant codes, standards and Company standards – Coordinate, Monitor and handle I&C design and engineering with EPC contractor as per project expectation and complete the same within the time frame – Work with other discipline engineers within IPMT, EPC contractor, and Project Engineering / Operation / Site Interface to resolve technical issues and ensure quality I&C engineering execution and integrity etc – Perform regular and timely technical reviews of I&C engineering deliverables developed by engineering consultants / contractors, ensuring design quality in compliance with relevant codes, standards, and best practices – Ensure integration of overall I&C engineering coordination within IPMT I&C Engineering Team – Review and approval of Engineering Consultant’s and EPC Contractor’s work and ensure compliance with the project specifications, relevant codes and standards, and best industry practices – Coordinate the required engineering participation in the development and analysis of various design options and business models – Contribute input and expertise in the development and analysis of various design options and business models to design optimization and validation – Participate in teams for equipment sizing / equipment selection considering optimization and standardization – Ensure that the facilities are designed in accordance with the latest corporate guidelines with respect to environment and health aspects – Ensure full utilization of the existing facilities while optimizing the facilities required for the new projects – Participate in layout reviews, Model review, design reviews, and technical workshops – Provide technical assistance and coordination with other discipline engineers – Coordinate technical reviews and bid evaluation, and performance evaluation – Provide technical assistance during installation, pre-commissioning & commissioning

    Requisition ID

    ۲۰۱۸-۳۱۳۴۰

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

     

  • Wood is currently looking to hire an Electrical Engineer for ADNOC Offshore project to be based in client office in Abu Dhabi, United Arab Emirates. – Prepare, check, and approve Electrical Engineering and Design deliverables such as single line diagrams, schematics, layouts, specifications, studies, reports, and datasheets – Perform calculations and system studies (e.g. Load Flow, Short Circuit, Motor Starting, Harmonic, Transient Stability, Power factor correction, Cable sizing, tray sizing, lighitng) – Carry out technical investigations, produce technical reports, engineering standards, and procedures – Perform site surveys and define / execute modifications to existing facilities on brownfield projects   – Prepare material requisitions for HV / LV switchboards, transformers, UPS systems, trace heating, other electrical equipment and ELV systems (e.g. Telecom, CCTV, access control, PAGA) – Prepare sub-contract requisitions specifying installation scopes of work – Review Suppliers’ quotations and prepare technical evaluations and meet with suppliers – Take responsibility of MR packages, review / approve supplier documentation – Perform inspection and witnessing of tests on major equipment – Liaise closely with other functional groups as well as client personnel and participate in meetings and workshops – Review drawings and document issued by other engineering groups – Populate and maintain Electrical Database – Supervise assigned team and junior colleagues – Assist Lead Engineer / Discipline Manager in other project tasks / proposal activities as required

    Requisition ID

    ۲۰۱۸-۳۰۹۴۱

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Staff / Permanent

     

  • Wood is currently recruiting for an Instrument and Control Engineer Engineer for its ADNOC Offshore client to be based in Abu Dhabi, United Arab Emirates. – Provide technical expertise on all engineering subject matter pertaining to I&C engineering and design – Ensure I&C design and engineering compliance with relevant codes, standards and Company standards – Coordinate, Monitor and handle I&C design and engineering with EPC contractor as per project expectation and complete the same within the time frame – Work with other discipline engineers within IPMT, EPC contractor, and Zadco Engineering / Operation / Site Interface to resolve technical issues and ensure quality I&C engineering execution and integrity etc – Perform regular and timely technical reviews of I&C engineering deliverables developed by engineering consultants / contractors, ensuring design quality in compliance with relevant codes, standards, and best practices – Ensure integration of overall I&C engineering coordination within IPMT I&C Engineering Team – Review and approval of Engineering Consultant’s and EPC Contractor’s work and ensure compliance with the project specifications, relevant codes and standards, and best industry practices – Coordinate the required engineering participation in the development and analysis of various design options and business models – Contribute input and expertise in the development and analysis of various design options and business models to design optimization and validation – Participate in teams for equipment sizing / equipment selection considering optimization and standardization – Ensure that the facilities are designed in accordance with the latest corporate guidelines with respect to environment and health aspects – Ensure full utilization of the existing facilities while optimizing the facilities required for the new projects – Participate in layout reviews, Model review, design reviews, and technical workshops – Provide technical assistance and coordination with other discipline engineers – Coordinate technical reviews and bid evaluation, and performance evaluation – Provide technical assistance during installation, pre-commissioning & commissioning

    Requisition ID

    ۲۰۱۸-۳۰۹۴۰

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Staff / Permanent

     

  • Wood is currently recruiting for an PMC Senior Mechanical Commissioning Engineer for ADNOC Offshore. Position will initially be based in fabrication yard for few months on residential basis and will then transfer offshore on island for remaining duration.   Successful candidate will need to perform the following duties and responsibilities; – Review and approve Mechanical Commissioning procedures – Drive population of systems completion database – Monitor and track systems completion and punch closure – Coordinate commissioning activities and tie-in activities – Liaise with operation personnel to ensure that prerequisites are fulfilled before any systems / subsystem commissioned (vendor documents, FATs –SATs) – Approve / review tests procedures and method statements – Attend tool boxes – Review / Approve DPRs and relevant installed quantities – Supervise contractor performance in terms of progress, HSE and quality – Monitor contractors to adhere to site policies, regulations, HSE rules – Liaise interfaces internally (with other company disciplines) and externally (with operation personnel, vendors, third parties – Review / assess / approve site queries and authorize site modifications in coordination with PMT – Assist commissioning group and operations personnel assigned to the commissioning group at onshore and offshore locations; assist coordination and execution of the commissioning activities at onshore and offshore locations – Assist coordination liaison for all interfaces on site and with all integrity groups to ensure to ensure the project requirements and performance standards are achieved – Provide input for the most effective use of vendors and assistance during CMS population – Provide input to the development of the detailed plan and planning systems including reporting of progress; ensure that changes implemented during the commissioning activities are approved and documented – Provide review of TQ’s, EQ’s, and SI’s ensuring that they are included in the commissioning scope where applicable – Provide assistance and guidance in the preparation of requisitions, technical specifications for materials, equipment and consumable required to perform the commissioning scope of work

    Requisition ID

    ۲۰۱۸-۳۰۸۹۶

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Staff / Permanent

     

  • Wood is currently looking to recruit for a Instrument and Control Commissioning Engineer on one of its ADNOC Offshore projects. Successful candidate will be responsbile to perform the below duties and responsibilities    Must have practical hands on field experience during all stages of project life Construction, Commissioning & start up and be able to communicate with team leaders of a multi-discipline team. Be a team player who can provide valuable input during both planning and execution phase. Must have working knowledge and understanding of yokogawa ICSS – Assist commissioning group and operations personnel assigned to the commissioning group at the onshore and offshore locations – Assist Co-ordination and execution of the commissioning activities at the onshore and offshore locations – Assist Co-ordination liaison for all interfaces on site and with all integrity groups to ensure to ensure the project requirements and performance standards are achieved, including maintaining schedule and cost targets – Review Operational Test Procedures associated with the Commissioning of Instrument system/s; Fire & Gas System. ICSS Commissioning Interface. Safety & Controls Interface. DCS. VESDA System. Riser ESV Testing. Radio VHF, PABX, CCTV, Intruder detection. MPFM. FOC. CP. UPS etc – Assist with WHT/Main Complex commissioning Interface – Be familiar with AVEVA, INtools – Understanding working knowledge of solar panel power systems – Provide input for the most effective use of vendors – Provide input during project review of ITR/ITP including system/s allocation during CMS population – have execution and working knowledge of CMS used on major projects ICAPS, GOC, Winpcs  – Witness factory test as necessary – Assist in the N2 leak testing project execution – Review of subsea flow controls and wellhead operation – Input to the development of the detailed plan and planning systems including reporting of progress – Attending Commissioning and inter Department meetings – Support of the discipline commissioning engineers in achieving the commissioning scope – Support Liaison with independent inspection authorities and demonstrate facilities as required to satisfy the project performance standards and legislative requirements – Ensure that changes implemented during the commissioning activities are approved and documented – Provide Review of TQ’s, EQ’s, and SI’s insuring that they are included in the Commissioning scope where applicable – Provide Assistance and directive in the Preparation of requisitions, technical specifications for materials, equipment and consumable required to perform the commissioning scope of work – Participate in the hand over acceptance of system/s sub-system/s with the Mechanical Completion and Operations group – Promote project safe working practices in line with the safety management systems – Provide positive input in Planning and scheduling the correct resource levels – Liaison with construction in providing and achieving the milestone objectives – Ensure that the relevant permit to work is in place prior to commencement of work

    Requisition ID

    ۲۰۱۸-۳۰۶۱۶

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Staff / Permanent

     

  • – Responsible for the day-to-day running of the Engineering Coordinators Team – Take receipt of drawings from DCC for As-building purposes – Cataloguing the drawings/documents into Registers – Monitoring of Close-out activities as required for handover to Client – Ensuring that Constructions workpacks are complete with regards to Engineering Drawing content – Inputting drawings into Documentum – Supporting the Engineering Department with As-building & Close-out activities

    Requisition ID

    ۲۰۱۸-۳۰۳۱۵

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

     

  • Wood is currently looking to recruit a Senior Project Engineer assigned responsibility for a portion of the Project scope which is aligned with the Project’s work breakdown structure and geographic distribution. The PE role is to manage the contract requirements for the assigned scope by ensuring the EPC contractor executes and delivers in compliance with HSE, Quality, Technical, Commercial and Schedule requirements. The PE role spans all execution phase activities from contract award through final acceptance and Project closeout. The PE resides mainly in the home office and when required the Contractor’s office and may move from the design site to the fabrication/construction/completion location(s) as the workface moves. This includes monitoring progress, ensuring appropriate reviews are conducted, managing change and preparing all contract correspondence related to the assigned scope. The PE is responsible for engaging discipline engineers and expert resources from the Project Team and functions as required to complete their work scope consistent with the Project Objectives. The PE is also responsible for maintaining and managing the risk and cost control engineers, engaging with discipline engineers from the Project Team for to interaction   – Promotes and champions the HSE goal of Zero Incidents; “Nobody Gets Hurt”. Works with Project HSE to ensure that Contractors comply with Company HSE policies, procedures, rules & regulation – Responsible for the completion of the assigned work scope consistent with the Project Objectives and in accordance with the technical and commercial requirements of the Contract – Takes ownership of assigned scope beginning with detailed design through final acceptance and Project closeout; drive engineering, procurement, fabrication, construction and commissioning of assigned system to ensure schedule is met – Verifies that Contractor work processes are in place and procedures are followed – Ensures Contractor’s work follows accepted practices and conforms to Specifications – Manages interfaces associated with assigned scope – Reviews Contractor and Vendor deliverables; track PO’s and resolve issues causing delays – PMT/PMC focal point for the review and approval of Vendors/Subcontractors and field changes related to the assigned scope – Identifies vulnerabilities and opportunities for improved performance – Monitors Contractor’s performance and identifies any corrective actions – Drives the Contractor to identify and take corrective actions; escalates performance issues when Contractor action is not forthcoming; verifies actions are taken and desired results are achieved – Ensure proper preservation measures are planned and implemented throughout execution   – Engages Project Team and functional resources to verify that the design, fabrication and construction is consistent with project specifications and standards – Supports the development and administration of an Engagement Plan that anticipates required Company reviews, resolves known uncertainties and allows for additional resources to address unanticipated uncertainties – Administers Key Issues and Project Issues for assigned work scope – Oversees Engineering, Procurement and Construction Surveillance Plans – Assists with the administration of Third Party Verification Program – Consolidates and obtains alignment on Company position for assigned scope – Supports external reviews (if any) and administers follow up actions – Coordinates specification deviations that require Subject Matter Expert review and input – Serves as interface between Project Team and Contractor – Coordinates and facilitates meetings to resolve issues and enable Contractor to deliver in accordance with the Contract – Administers and enforces Contract Requirements and Coordination Procedures – Reviews and endorses Changes (MOC’s) for designated project component and following approval ensures the implementation of the Change – Prepares Project correspondence related to allocated scope – Ensures smooth transitions between Project stages (Engineering / Procurement to Fabrication to Installation / Construction and Commissioning) – Heavily involved in interface and coordinating interfaces between components and stages and with other sites for specific area of responsibility – Leads problem solving activities across Project sites – Ensures coordination of external interfaces with other contractors – Assists with handover planning from Project to Operations – Leads PMT / PMC in applying Project Management Systems – Participates in development on monthly progress reports and provides work status to Team Leader and / or PM – Ensures Lessons Learned are effectively applied and captured – Assists UAE Nationals in their development to take up lead roles within the organization

    Requisition ID

    ۲۰۱۸-۲۹۰۰۵

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Staff / Permanent

     

  • Wood is currently looking to recruit a Senior Construction and Completion Advisor to lead and manage the execution planning effort for the island construction and commissioning project effectively and ensure that the project is delivered on time, on budget and to agreed quality standards. Primary work assignment focused on execution planning managing the interface with ADNOC regarding project design, construction, commissioning HSE, marine, contract compliance and inspection for compliance with drawings and specifications. – Leads overall Execution Planning effort for the 1MMBD Project. Serves as primary point of contact for all Construction and Commissioning activities for the subject project – Ensure implementation of corporate safety codes of practice, standards and specifications – Responsible for day to day management activities including coordination with business units and support units – Lead / oversee FEED contractor in preparation of detailed Construction Execution and Commissioning Plans. Develops Construction Installation Sequence and schedule and ensures deliverable availability support efficient executio – Plans module installation and hook-up program. Develops plans to maximize work completion in the fabrication yard and on island prior to module delivery to ensure hook-up and commissioning activities are streamlined / optimized – Review and prepare plans to organize and coordinate construction project including detailed engineering drawings, construction sequence, modularization / pre-assembly studies, logistics plans, estimates of materials, cost and schedule estimates, – Develops and implements strategy for temporary site facilities, camps.   Provides construction input to contracting activities including ITT preparation / tendering, bid preparation, bidder evaluations and recommendations – Ensure accurate records of construction activities and material used are maintained and notify contractors and supervisors of authorized project modifications and non-conformance. – Participate in phases of field work, as necessary – Ensure construction plans and activities are in compliance with design standards, approved plans and permits. – Monitor change orders and evaluate progress payments – Leads constructability program implementation. Review engineering plans for constructability, making comments and recommendation to improve construction – Process all final documents for project close out – Coordinate with contractors in Emergency Response scenarios and to complete the planned exercises as per the plan

    Requisition ID

    ۲۰۱۸-۲۹۰۰۱

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Staff / Permanent

     

  • Wood is currently looking to recruit a Senior Civil Engineer to be deployed within a client Project Management Team in PMC capacity to assist in the management of a large EPC project which will be awarded in Q4 2018.   If you are interested in the above exciting role, please register your CV and apply online. – Develop and enhance the discipline through implementation of best practice in people management, systems and business processes – Ensure technical accuracy and integrity of the design engineering carried out by the discipline – Provide staff resources with appropriate skills for the project and business requirements – Manage the PMC Structural team objectives and budget – Review / Validate detailed design and Engineering Deliverables – Participation in design review, 3D Model Reviews, Value Engineering, Risk Management workshops, constructability Reviews, PHSERs , IPR etc. – Carryout Technical Evaluation of Bids, Issue Bid Technical Clarifications, Technical Evaluation Reports and Recommendations – Review and approve project ‘’ AS BUILT’’ and project Design Dossier prepared by EPC Contractor

    Requisition ID

    ۲۰۱۸-۲۸۹۸۱

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

     

  • Wood is currently looking to recruit a Senior Pipeline Engineer to be deployed within a client Project Management Team in PMC capacity to assist in the management of a large EPC project which will be awarded in Q4 2018.   If you are interested in the above exciting role, please register your CV and apply online.   – Select pipeline route – Create mechanical design, i.e. wall thickness, preliminary stress analysis, expansion analysis, and free-span analysis – Develop material take-offs – Develop material specifications and data sheets – Develop construction and inspection (NDT) specifications – Prepare Pipeline EPC scopes of work – Input EPC schedules and Cost Estimate – Review / Validate detailed design and Engineering Deliverables – Participation in design review, 3D Model Reviews, Value Engineering, Risk Management workshops, constructability Reviews, PHSERs , IPR etc. – Carryout Technical Evaluation of Bids, Issue Bid Technical Clarifications, Technical Evaluation Reports and Recommendations – Review and approve project ‘’ AS BUILT’’ and project Design Dossier prepared by EPC Contractor

    Requisition ID

    ۲۰۱۸-۲۸۹۷۷

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

     

  • Wood is currently looking to recruit a Senior Drafting and Designer to be deployed within a client Project Management Team in PMC capacity to assist in the management of a large EPC project which will be awarded in Q4 2018.   – Assemble and supervise all drafting activities / design group capable of executing a project – Co-ordinate all disciplines drafting activities and ensure they are produced to the correct level of quality and in accordance with the project plans – Estimate project man-hour budgets, review budgets with project management and maintain schedule throughout the life cycle of the project – Undertake all matters related to planning, progressing, reporting, manpower loading and general administration – Ensure interaction with all disciplines for all interfaces – Effectively co-ordinate drafting and design activities with the project and client – Attend and contribute to design / construction reviews – Oversee Piping bulk material aspects, bulk take-offs, quantification, allocation and manipulation of a material management system – Review and check vendor document / information for compliance with project specifications

    Requisition ID

    ۲۰۱۸-۲۸۹۷۵

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

     

  • Wood is currently looking to recruit a Sr. Electrical Engineer to be deployed within a client Project Management Team in PMC capacity to assist in the management of a large EPC project which will be awarded in Q4 2018.   If you are interested in the above exciting role, please register your CV and apply online.  – Administer the package of Wood electrical engineering group – Advise PMC core management on issues surrounding future appointments of electrical personnel – Ensure that all PMC Electrical Engineers under his / her supervision work to the project procedures, specifications and standards, good engineering practices and techniques, and any project-specific requirements – Review / Validate detailed design and Engineering Deliverables – Supervise the day to day engineering interfaces between PMC core engineering group, Project Managers and the engineering teams assigned to the EPC package – includes interaction with all other specialist disciplines as required – Participate in Hazard and Operability (HAZOP), Safety Integrity Level (SIL), Project Health, Safety and Environment Review (PHSER) exercises for the EPC projects during detailed engineering Participation in design review, 3D Model Reviews, Value Engineering, Risk Management workshops, constructability Reviews, PHSERs , IPR etc. – Input into engineering procedures and work practices as appropriate, in conjunction with Core Electrical Lead – Carryout Technical Evaluation of Bids, Issue Bid Technical Clarifications, Technical Evaluation Reports and Recommendations – Develop close working relationships between all engineering group members, Project Managers / projects team and EPC staff to ensure a consistent approach and effective resolution of issues – Develop a good team spirit within assigned PMC personnel and encourage team working with the Contractor and other customer groups

    Requisition ID

    ۲۰۱۸-۲۸۹۷۰

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

     

  • – Act as a focal point for engineering discipline leads regarding scheduling and progress issues. – Be particularly diligent in recognizing and reporting to Project Management potential problems in all phases of the project. – Ensure that the schedules and systems are integrated to measure, trend and forecast the work, and are in place and managed. – Contribute to the change management process, analysing and reporting schedule impacts to the project. – Updating the proposal schedule to indicate specific milestones agreed upon in the Contract. – Preparing engineering and procurement schedules at varying levels of detail. – Assisting with obtaining alignment between Engineering and Procurement Schedules. – Assisting with obtaining scheduling alignment with key construction activities. – Delivering of weekly and monthly project reports. – Ensuring that Corporate Systems are set up and maintained inline with project schedules. – Periodically updating schedules to include scope changes, latest progress and delivery information. – Assisting with development of Design Change Notices by highlighting impact on schedule, and assist with related tracking and re-baselining effort. – Obtaining deliverables and drawing lists and updates from disciplines and distribute compiled reports. – Developing and distribute project curves of progress, cost and manpower, including planned, actual and forecast figures.

    Requisition ID

    ۲۰۱۸-۲۸۹۶۰

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

     

  • – Act as a focal point for engineering discipline leads regarding scheduling and progress issues. – Be particularly diligent in recognizing and reporting to Project Management potential problems in all phases of the project. – Ensure that the schedules and systems are integrated to measure, trend and forecast the work, and are in place and managed. – Contribute to the change management process, analysing and reporting schedule impacts to the project. – Updating the proposal schedule to indicate specific milestones agreed upon in the Contract. – Preparing engineering and procurement schedules at varying levels of detail. – Assisting with obtaining alignment between Engineering and Procurement Schedules. – Assisting with obtaining scheduling alignment with key construction activities. – Delivering of weekly and monthly project reports. – Ensuring that Corporate Systems are set up and maintained inline with project schedules. – Periodically updating schedules to include scope changes, latest progress and delivery information. – Assisting with development of Design Change Notices by highlighting impact on schedule, and assist with related tracking and re-baselining effort. – Obtaining deliverables and drawing lists and updates from disciplines and distribute compiled reports. – Developing and distribute project curves of progress, cost and manpower, including planned, actual and forecast figures.

    Requisition ID

    ۲۰۱۸-۲۸۹۵۹

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

     

  • – Assist Senior Management with the planning, authorization, and execution of negotiations with regards to contract negotiation / agreements. – Review and evaluate terms and conditions and make recommendations for their revision and/or acceptance. Manage the review of entire agreement to ensure all risk areas are addressed. – Coordinate with legal and contract on contractual issues and assist in regular contract reviews, reporting concisely to the Senior Management. – Develop and own corporate Contract Administration / Subcontract procedures. – Participate in negotiation team for framework agreements, lump sum or reimbursable agreements, joint development agreements, outsourcing agreements, and master services agreements, etc. – Standardise Company’s standard terms and conditions as well as policies, procedures, processes and the roles and responsibilities supporting them. – Provide guidance to the business units management in addressing contract matters relative to identifying and quantifying the risk of potential performance problems. – Work closely with Purchasing and Senior Management with the aim of devising contracting solutions to help them attain their business goals (e.g. resolve issues related with third party and supply chain management). – Provide assistance in resolving scope ownership and indemnity issues with our customers and suppliers. – Team with the Business Units to manage contract disputes (Claim management, EOT etc). – Advise and interface with Senior Management on a broad range of commercial issues, including the interpretation of compliance with contract terms. – Ensure timely and accurate invoicing and the expediting of payment. – Ensure accurate and timely reporting procedures on contractual activities.

    Requisition ID

    ۲۰۱۸-۲۸۹۵۶

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

  • – Assist Senior Management with the planning, authorization, and execution of negotiations with regards to contract negotiation / agreements. – Review and evaluate terms and conditions and make recommendations for their revision and/or acceptance. Manage the review of entire agreement to ensure all risk areas are addressed. – Coordinate with legal and contract on contractual issues and assist in regular contract reviews, reporting concisely to the Senior Management. – Develop and own corporate Contract Administration / Subcontract procedures. – Participate in negotiation team for framework agreements, lump sum or reimbursable agreements, joint development agreements, outsourcing agreements, and master services agreements, etc. – Standardise Company’s standard terms and conditions as well as policies, procedures, processes and the roles and responsibilities supporting them. – Provide guidance to the business units management in addressing contract matters relative to identifying and quantifying the risk of potential performance problems. – Work closely with Purchasing and Senior Management with the aim of devising contracting solutions to help them attain their business goals (e.g. resolve issues related with third party and supply chain management). – Provide assistance in resolving scope ownership and indemnity issues with our customers and suppliers. – Team with the Business Units to manage contract disputes (Claim management, EOT etc). – Advise and interface with Senior Management on a broad range of commercial issues, including the interpretation of compliance with contract terms. – Ensure timely and accurate invoicing and the expediting of payment. – Ensure accurate and timely reporting procedures on contractual activities. – Oversee all subcontracting activities and assist and be in line with the Procurement team.Post award contract administration &close out

    Requisition ID

    ۲۰۱۸-۲۸۹۵۵

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

     

  • Wood is currently looking to recruit a Sr. Telecom Engineer to be deployed within a client Project Management Team in PMC capacity to assist in the management of a large EPC project which will be awarded in Q4 2018.   The successful candidate will be mobilised as of October 2018 and will initially be based in the client office in Abu Dhabi, UAE for few weeks before relocating to the successful EPC Contractor Home Office based in the UAE, India, Spain or Italy. Award of the EPC Contract is expected in Q4 2018. Duration of the assignment in the EPC Home Office is expected to be around 8-10 months, following which the candidate will relocate to client office or project onshore site in Abu Dhabi for the rest of the position assignment.   If you are interested in the above exciting role, please register your CV and apply online.   – Work alongside the owner’s engineers whilst providing a high level of technical expertise to oversee the project design – Monitor the telecommunication contractor’s work throughout the duration of the assignment – Resolve technical issues with respect to telecommunication system design – At site, high-level policing of the installation to ensure compliance with project requirements and home office design

    Requisition ID

    ۲۰۱۸-۲۸۲۴۰

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

     

  • Wood is currently looking to recruit a Sr. HSE Engineer to be deployed within a client Project Management Team in PMC capacity to assist in the management of a large EPC project which will be awarded in Q4 2018.   The successful candidate will be mobilised as of October 2018 and will initially be based in the client office in Abu Dhabi, UAE for few weeks before relocating to the successful EPC Contractor Home Office based in the UAE, India, Spain or Italy. Award of the EPC Contract is expected in Q4 2018. Duration of the assignment in the EPC Home Office is expected to be around 8-10 months, following which the candidate will relocate to client office or project onshore site in Abu Dhabi for the rest of the position assignment.   If you are interested in the above exciting role, please register your CV and apply online.   – Maintain and help control daily HSE practices through regular checks of work sites, ensure that hazards are identified, precautionary measures are implemented and relevant HSE advice provided – Ensure that project Health, Safety and Environmental programs and procedures are communicated to and regularly reinforced with site personnel – Promote safe working systems and procedures and monitor the proper application of the “Permit to Work” system, SIMOPS and associated Job Safety Analysis, as well as another approved project – HSE and contractor related policies, plans, procedures and guidelines – Review and provide comments regarding contractor developed HSE plans and procedures – Coordinate and participate in the provision of HSE awareness in accordance with ISO 14001 and OHSAS 18001 specifications Prepare programs and arrange participation training sessions in conjunction with line management – Participate as member of construction site emergency response team, and provide first line advice to the designated Incident Controller and / or On Scene Commander concerning containment of emergency – Ensure that any project incidents are immediately reported to management and project HSES in parallel – Investigate all site HSE related incidents, including near misses, to an appropriate level. Analyse immediate and root causes, determine future action to reduce these occurrences – Promote, support and participate in HSE Observation Card (HSEOC) program – Prepare and maintain statistical records of project site HSE performance (eg, work-hours, leading and lagging indicators, etc) and communicate regularly with project HSE Advisor and the Abu Dhabi based project HSE Engineers and the project Safety Analyst – Conduct frequent audits and inspections to ensure the effectiveness of HSE programs on critical operations/equipment and procedures at assigned location; present recommendations for improvement and follow-up their implementation

    Requisition ID

    ۲۰۱۸-۲۸۲۳۹

    Multi-Locations

    No

    Country

    United Arab Emirates

    City

    Abu Dhabi

    Vacancy Type

    Fixed Term

وود گروپ Wood Group یک شرکت چند ملیتی خدمات نفت و گاز می باشد. دفتر مرکزی شرکت Wood Group در آبردین اسکاتلند واقع شده است.

خبرهای مرتبط
ارسال نظر شما
مجموع نظرات : 0 در انتظار بررسی : 0 انتشار یافته : ۰
  • نظرات ارسال شده توسط شما، پس از تایید توسط مدیران سایت منتشر خواهد شد.
  • نظراتی که حاوی تهمت یا افترا باشد منتشر نخواهد شد.
  • نظراتی که به غیر از زبان فارسی یا غیر مرتبط با خبر باشد منتشر نخواهد شد.

آخرین اخبار

عضویت در خبرنامه نفت آنلاین